iFixit has published its teardown of Apple's new touchscreen MacBook Pro with PROLED XDR Display, and the repair specialist gave the laptop a repairability score of 5 out of 10, according to reports from MacRumors and 9to5Mac. That is one point higher than last year's M5 MacBook Pro and one point below the MacBook Neo.

How the glowing logo works

The most talked-about detail is the illuminated Apple logo on the lid. Because the machine has no backlight to shine through, iFixit found that Apple lights the logo with a strip of four LEDs working alongside a reflective layer and a diffuser to spread the glow evenly. When the LEDs are off, a two-way mirror coating gives the logo a shiny, reflective finish.

Reaching the logo is not simple. It sits behind the display, so a repair would mean removing the screen. iFixit reported that it destroyed the OLED panel while trying to get in, because the glass separated from the layers underneath.

Display, hinge and weight

iFixit also examined the tandem OLED panel, which stacks two light-emitting layers for higher brightness than a conventional single-layer OLED. Under a microscope, the blue subpixels were larger than the red and green ones, which iFixit says should reduce strain on the materials.

Apple says the hinge was designed for touch. According to MacRumors, iFixit found it essentially identical to the hinge on the M6 MacBook Pro, only stiffer, so the screen holds its angle better when tapped near the top.

The machine is lighter than the standard 14-inch model, at about 3 pounds (1.38 kg) versus 3.4 pounds (1.55 kg), as 9to5Mac notes. iFixit's numbers show Apple removed some aluminum from the lower chassis, which weighs 364 grams against 456 grams on the M6 model. The display assembly is 101 grams lighter despite the touchscreen and the logo lighting, the battery is 2 grams lighter, and a slightly smaller trackpad saves another 8 grams.

Repairability

The Thunderbolt/USB-C ports and the fans can be replaced individually, but the logic board has to come out first. 9to5Mac reports the headphone jack also requires removing the board, while the HDMI port and SDXC card slot are soldered to it, as are the memory and storage.

On a positive note, iFixit swapped logic boards between two of the laptops and ran Apple's Repair Assistant. The battery, display, Touch ID sensor, True Tone, brightness controls and touchscreen all worked afterward, and iFixit was able to enroll a fingerprint with the donor board installed. Last year's M5 MacBook Pro, by contrast, failed to complete Touch ID calibration in the same test, and the touchscreen did not introduce new parts-pairing problems, according to iFixit.

0 comments

Sign in or create a free account to join the discussion.